ACG0798CA  - Transfluid Portugal  Sales

Coupling comprising:  coupling with conical sleeve, drilled with D = Ø60 mm with keyway to DIN 6885/1  Angefl. Elastic coupling BT40, drilled and grooved, DIN 6885/1 maximum hole diameter Ø80 mm specify when ordering    Viton seals  melting plug T = 140 ° C  weight about 50.3 kg WITHOUT oil filling

Coupling: coupling with taper sleeve, bored with D = Ø65 mm without Keyway according to DIN 6885/1 Angefl. Elastic coupling BT40, drilled and grooved, according to DIN 6885/1 maximum bore diameter Ø80 mm Viton seals-melting plug T = 140 ° C Weight approx 50.3 kg WITHOUT oil filling

Transfluid Turbokupplung

Transfluid Turbokupplung

Coupling comprising:  with internal wheel  coupling with conical sleeve, drilled with D = Ø60 mm and Keyway to DIN 6885/1  with flexible coupling BT50, undrilled Melting plug T = 140 ° C  Viton seals WITHOUT oil filling

Coupling with:  clutch, drilled with D = Ø75 mm G7 and Keyway according to DIN 6885/1  Angefl. Elastic coupling BT50, drilled and grooved, according to DIN 6885/1 maximum bore diameter Ø90 mm Viton seals   fusible plug T = 140 ° C  Weight approx 77 kg WITHOUT oil filling

clutch

Coupling comprising:  input clutch with the conical sleeve, drilled with D = Ø55 mm and keyway according to DIN 6885/1  leaving Flanged elastic coupling BT50, drilled with G = Ø55 mm and keyway according to DIN 6885/1  Viton seals  melting plug T = 140 ° C  weight about 84 kg WITHOUT oil filling

turboclutch

Transfluid Turbokupplung

hydraulic coupling

Rubber Block

(Thrustor TF30 / 50 - NGO)

thrustor TF30/50 - LSM - features according to the attached catalogue No. 355GB

(thrustor TF30/50 - LSM - features according to the attached catalogue No. 355GB)